21stCentury Microfine Gear oil medium duty auto9motive lubricating oil blended from selected base oils added with high viscosity Index, anti oxidant, anti rust and anti foaming additives.

API-GL4,MIL - L - 2105B, IS : 1118 - 1992

21st Century Microfine Gear oil medium duty automotive Lubricating oil blended from selected base oils added with high viscosity index, anti oxidant , anti rust and anti foaming additives.

• Provides full protection against wear.
• Excellent anti - weld Anti rust and anti corrosive properties.
• Good oxidation stability.
• Long service life even under high temperatures.

21st Century Pumpset oil is a monograde engine oil blended with selected additives to meet the requirements of stationary engines, such as generator sets and agricultural Pumpsets using diesel and LDO.

API CB/SB, MIL - L - 2104B, Suppl 1.

21st Century 2T is an ideal Lubricating oil formulated for use in all 2/4 stroke engines to mix simultaneously in the petrol system of oil injection system.

• Instant mixing with petrol.
• Smooth start up of engine.
• Minimum spark plug chocking & pre - ignition.
• Protection against seisure
• Lower, fuel consumption
• Low emission & better pick up

21st Century Engine Coolant is formulated with premium quality ethylene glycol base & has been developed for use in radiators of all types of automotive Vehicles. It is used for prevention of freezing of internal combustion engine and for corrosion prevention.

Wheel bearing grease is made from fine quality sodium soap & filtered mineral lubricating oil and other additives. The grease is homogeneous and of fibrous texture, free from objectionable odder and visible impurities.

MEETS:
IS 10647 : 1983 specifications.

• Good structural stability
• Withstands effectively the excessive churning.
• Ensures protection to lubricated parts against heat, rust & corrosion.

AP - 3 is multifunctional long life grease meeting requirements of automotive vehicles and industrial plant including ball and roller bearings and electric motors' bearings lubrication.

This grease is lithium based, formulated with specially selected raw materials for optimum lubrication under normal as well as adverse mechanical conditions. The quality materials incorporated in the grease reduce friction and wear, thus enhance component life and increase re-lubrication intervals.

The grease is smooth and homogeneous and free from any odor, visible impurities and abrasive particles. The manufactured grease conforms to IS 7623 : 1993 specifications for Regular Type - Lithium Base Grease for Auto & Industrial Purpose.

Chassis grease is made from fine quality calcium, refined mineral oil. The grease is smooth, homogeneous, free from objectionable odor and visible impurities.

The manufactured grease conforms to IS 506 : 1993 specifications for Automotive and other General purpose Grease - Grade I generally suitable for general purpose chassis.

These are low viscosity index mineral lubricants for protecting machinery from excessive wear and provide economical lubrication.

A mobile liquid consisting of film forming ingredients, rust inhibitors, water displacing additives etc. is a temporary corrosion preventive, soft film., solvent deposited, water displacing agent and is suitable primarily as a water displacing fluid for wet metal surfaces. The film left as a residue after treatment confers protection against corrosion under moderate conditions.

• Leaves a residual, thin. soft. waxy like film on application and evaporation of solvent.
• Non-toxic to persons handling it with care.
• Non-staining.
• Compatible with lubricating oils and as such, surface film need not be removed.
• Can be easily applied by brush, spary or swab.
• Easily removable by wiping with cloth soaked in common petroleum solvents ; such as white spirit and kerosene.
• Suitable for use by dipping or spraying at room temperature.
• Free from water, dirt or other visible impurities.

A non - staining type neat cutting oil and is a blend of refined mineral oil base stock and selective from non corrosive sulphurized fatty oils to provide stable oil film, excellent heat dissipation and extreme pressure properties.

• Meet antiweld and lubricity requirements of the most severe machining operations on the most difficult - to - machine metals such as copper and its alloys.
• Immiscible with water.
• Does not contain any free sulphur.
• Affords good cooling, chip flushing and penetration.
• High oiliness.
• Better low temperature stability.
• Free from objectionable odour.

This hydraulic oil is superior grade and is specially developed for sophisticated hydraulic device with hydro mechanical actuators. Applicable in system where oil is used for extended periods.

It is a stable, non - staining, refined petroleum oil blended with fatty oil to improve wetting characteristics.

Iron / Aluminum wire drawing operation.

This Product is blended from highly refined base stock having excellent oxidant stability, anti-wear, antifoaming and anti rusting qualities. It is low Viscosity Lubricant. This oil is recommended for use in the Textiles, Paper, Machine Tool & Steel Mills Industries.

• Forms good oil film.
• Resists Rusting.
• Reduces friction losses.
• Lower Power consumption.
• Chemically stable.
• Good demulsibility.

This Product is formulated from selected base stock to provide low pour point, low floc point, dryness, good chemical stability & soluble in liquefied refrigeration equipment.

IS 4578 - 1989 SPECIFICATIONS

The product is formulated using specially refined base stock for services involving heat transfer to the extent of 275 oC.

• With stands higher temperature operation up to o 275 oC.
• Good heat transfer properties.
• Non corrosive & non-toxic.
• Low velocity.

This product is meant for the manufacture of Tyres, Tubes, Battery Cases, Footwear, Mats & Hoses, molded and extended goods etc.

• Reduces cost of finished products.
• Facilitate mixing process.
• Improves Processibility.
• Minimizes energy consumption.

This product is blended from refined base stock / straight mineral grade lubricant. It dos't contain any additive and is recommended for general purpose quenching of components. It has good wetting characteristics, high quenching speed & balanced viscosity.

MEETS:
IS 2664 - 1980 SPECIFICATIONS

• Quenching Speed Normal / Low.
• General purpose quenching operations.
• Good dispersent characteristics.
• Good heat transfer properties.
• Provides uniform surface hardness.
• Minimum quenching distortions.